Cisco 360 CCIE R&S Advanced Workshop 2 (CIERS2)

Our classes are always live and instructor led from our Exton, PA or EPIC Partner locations. Springhouse AnywhereLive options require Internet Access. Select classes are Guaranteed to Run (GTR). View our complete schedule policies.

 

 

 

 

Overview

Cisco 360 CCIE R&S Advanced Workshop 2 (CIERS2) v5.0 teaches learners how to use an expert-level, problem-solving process including the Options Analysis method to support complex network technologies and topologies. This course is part of a blended learning curriculum that supports expert-level preparation in routing and switching. This course has been updated to reflect the recent changes in the Cisco CCIE R&S lab that is implemented in the version 5 blueprint.

The CIERS2 course includes the following components:

  • Digital Kit
  • Reference Library
  • Preassessment Lab
  • Advanced Workshop 2 Labs
  • Virtual Rack Rental 100 hours
  • Workbook with Full-Scale Labs 01-10

Intended Audience

​The primary audience for this course follows:

  • Network engineers that need be able to use an expert-level, problem-solving process including the Options Analysis method to support complex network technologies and topologies when both configuring and troubleshooting an internetwork

The secondary audience for this course follows:

  • Network designers that design and support complex network technologies and topologies

At Completion

  • Perform expert-level tasks involving both configuring and troubleshooting WAN technologies and switched Ethernet networks
  • Perform expert-level tasks involving both configuring and troubleshooting RIPv2, EIGRP, and OSPF
  • Perform expert-level tasks for both configuring and troubleshooting route redistribution
  • Perform expert-level tasks for both configuring and troubleshooting BGP
  • Perform expert-level tasks for both configuring and troubleshooting MPLS Layer 3 VPNs
  • Perform expert-level tasks for both configuring and troubleshooting IPv4 multicast
  • Perform expert-level tasks for both configuring and troubleshooting IPv6 unicast and multicast connectivity
  • Perform expert-level tasks for both configuring and troubleshooting router QoS using the MQC
  • Perform expert-level tasks for both configuring and troubleshooting Cisco Catalyst 3560 Series QoS
  • Perform expert-level tasks for both configuring and troubleshooting IP services

Prerequisites

To gain the prerequisite skills and knowledge, learners must have passed the Cisco CCIE Routing and Switching written exam.

Before taking Cisco 360 CCIE R&S Advanced Workshop 2, learners should be very familiar with the topics that are covered in CIERS1. It is also strongly recommended that learners perform two self-paced, graded assessment exams before attending this course. Learners should be able to demonstrate advanced-level competencies (knowledge and skills) that are equivalent to the following from both configuration and troubleshooting perspectives:

  • Perform expert-level tasks involving WAN technologies and switched Ethernet networks
  • Perform expert-level tasks involving Routing Information Protocol version 2 (RIPv2), Enhanced Interior Gateway Routing Protocol (EIGRP), and Open Shortest Path First (OSPF)
  • Perform expert-level tasks for route redistribution
  • Perform expert-level tasks for Border Gateway Protocol (BGP)
  • Perform expert-level tasks for IPv4 multicast
  • Perform expert-level tasks for IPv6 unicast and multicast connectivity
  • Perform expert-level tasks for router quality of service (QoS) using the Modular QoS CLI (MQC)

Several training courses are available through Cisco Learning Partners that are recommended to meet the prerequisites:

  • Cisco CCNP
  • Implementing Cisco IP Routing v2.0 (ROUTE)
  • Implementing Cisco IP Switched Networks v2.0 (SWITCH)
  • Troubleshooting and Maintaining Cisco IP Networks v2.0 (TSHOOT)

Beyond CCNP

  • Implementing Cisco Quality of Service (QOS)
  • Configuring BGP on Cisco Routers Version 3.2 (BGP)
  • Deploying Cisco Service Provider Network Routing (SPROUTE)
  • Deploying Cisco Service Provider Advanced Network Routing (SPADVROUTE)

Exams & Certifications


Materials


Course Outline

Module1: Formulating a Final-Phase CCIE Preparation Strategy

  • Differentiate an expert-level lab into well-defined subtopics
  • Perform mental simulations and the Options Analysis method
  • Test rigorously and verify Cisco IOS Software-based configurations
  • Formulate and apply applicable internetworking techniques

 

Module 2: Troubleshooting Cisco Networks

  • Describe an overview of the CCIE R&S troubleshooting section
  • Review the troubleshooting method that is outlined in the CCIE v5 blueprint
  • Describe an approach to forming a hands-on CCIE troubleshooting template for connectivity issues


360RSW-LAB-TA03 and 360RSW-LAB-CA03: Two Separate Sections for Troubleshooting and Configuration

 

Troubleshooting Section:

  • Incident 1: Layer 3 - IP Protocol Independent Multicast (PIM) SSM
  • Incident 2: Layer 3 - OSPF
  • Incident 3: Layer 2 - Ethernet Switching
  • Incident 4: Layer 3 - MP-BGP VPNv4 Redistribution
  • Incident 5: Layer 3 - Route Targets Export and Import
  • Incident 6: Layer 3 - IPv6 Routing
  • Incident 7: Layer 3 - BGP
  • Incident 8: Security - PPP CHAP Authentication
  • Incident 9: Services - HSRP
  • Incident 10: Security - Zone-Based Firewall

 

Configuration Section:

  • Task 1: DMVPN and Serial Communications
  • Task 2: Switch Configuration
  • Task 3: IPv4 OSPF
  • Task 4: IPv4 EIGRP
  • Task 5: IPv4 RIP
  • Task 6: Reliable Static Routing and NAT
  • Task 7: Border Gateway Protocol
  • Task 8: IPv6 Routing
  • Task 9: Security
  • Task 10: QoS
  • Task 11: Address Administration
  • Task 12: HSRP Gateway Redundancy
  • Task 13: NTP Configuration
  • Task 14: Multicast Configuration
  • Task 15: SNMP

 

360RSW-LAB-TA04 and 360RSW-LAB-CA04: Two Separate Sections for Troubleshooting and Configuration

 

Troubleshooting Section:

  • Incident 1: Layer 3 - IPSEC VPN
  • Incident 2: Layer 2 - PPP
  • Incident 3: Layer 3 - OSPF
  • Incident 4: Layer 3 - EIGRP
  • Incident 5: Layer 3 - RIP
  • Incident 6: Layer 3 - BGP
  • Incident 7: Layer 3 - PBR
  • Incident 8: Application - QoS RSVP
  • Incident 9: Services - GLBP
  • Incident 10: Security - SSH

 

Configuration Section:

  • Task 1: DMVPN and Serial Communications
  • Task 2: Switch Configuration
  • Task 3: IPv4 OSPF
  • Task 4: IPv4 EIGRP
  • Task 5: IPv4 RIP
  • Task 6: Border Gateway Protocol
  • Task 7: IPv6 Routing
  • Task 8: Security
  • Task 9: QoS
  • Task 10: NTP
  • Task 11: Cisco IOS Software Services
  • Task 12: Multicast
  • Task 13: Address Administration

 

360RSW-LAB-TA05 and 360RSW-LAB-CA05: Two Separate Sections for Troubleshooting and Configuration

 

Troubleshooting Section:

  • Incident 1: Layer 3 - BGP
  • Incident 2: Layer 3 - RIP
  • Incident 3: Layer 3 - BGP Interior Gateway Protocol (IGP) Redistribution
  • Incident 4: Layer 3 - OSPF
  • Incident 5: Layer 2 and Layer 3 - EIGRP and Ethernet Switching
  • Incident 6: Layer 3 - IPv6 Routing
  • Incident 7: Layer 3 - Multicast
  • Incident 8: Services - Reliable Static Route
  • Incident 9: Services - TFTP
  • Incident 10: Management - EEM

 

Configuration Section

  • Task 1: DMVPN and Serial Communications
  • Task 2: Secure DMVPN
  • Task 3: Switch Configuration
  • Task 4: Cisco IOS Features
  • Task 5: IPv4 OSPF
  • Task 6: IPv4 EIGRP
  • Task 7: IPv4 RIP
  • Task 8: BGP
  • Task 9: MPLS/VPN Section
  • Task 10: IPv6 OSPFv3 Routing
  • Task 11: IPv6 EIGRP Routing
  • Task 12: IPv6 Connectivity
  • Task 13: QoS
  • Task 14: Gateway Redundancy
  • Task 15: Multicast

 

360RSW-LAB-TA06 and 360RSW-LAB-CA06: Two Separate Sections for Troubleshooting and Configuration

 

Troubleshooting Section:

  • Incident 1: Layer 2 - PPP Multilink
  • Incident 2: Layer 3 - OSPF
  • Incident 3: Layer 3 - EIGRP
  • Incident 4: Layer 3 - MPLS
  • Incident 5: Layer 3 - BGP
  • Incident 6: Layer 3 - IPv6
  • Incident 7: Layer 3 - Multicast
  • Incident 8: Application - Accounting
  • Incident 9: Services - NTP
  • Incident 10: Security - BGP Security

 

Configuration Section:

  • Task 1: Serial and Static VTI Communications
  • Task 2: Switch Configuration
  • Task 3: VPN
  • Task 4: IPv4 OSPF
  • Task 5: IPv4 EIGRP
  • Task 6: IPv4 RIP
  • Task 7: IPv4 Redistribution
  • Task 8: Border Gateway Protocol
  • Task 9: Gateway Redundancy
  • Task 10: Multicast
  • Task 11: Traffic Administration
  • Task 12: Network Address Translation


360RSW-LAB-TA07 and 360RSW-LAB-CA07: Two Separate Sections for Troubleshooting and Configuration

 

Troubleshooting Section:

  • Incident 1: Layer 3 - OSPF
  • Incident 2: Layer 3 - EIGRP
  • Incident 3: Layer 3 - RIP
  • Incident 4: Layer 3 - BGP
  • Incident 5: Layer 3 - Universal IPv4 Connectivity
  • Incident 6: Layer 3 - IPv6 Routing
  • Incident 7: Layer 3 - Multicast
  • Incident 8: Services - IP SLA
  • Incident 9: Services - QoS and Embedded Packet Capture
  • Incident 10: Layer 2 and Layer 3 - Backbone Connectivity

 

Configuration Section:

  • Task 1: IPsec VTI Communications
  • Task 2: Switch Configuration
  • Task 3: IPv4 OSPF
  • Task 4: IPv4 EIGRP
  • Task 5: IPv4 RIP
  • Task 6: IPv4 Redistribution
  • Task 7: Border Gateway Protocol
  • Task 8: IPv6
  • Task 9: Gateway Redundancy
  • Task 10: Multicast

 

 

Cisco 360 CCIE R&S Advanced Workshop 2 (CIERS2)http://springhouse.com/course-catalog/CIERS2Cisco 360 CCIE R&S Advanced Workshop 2 (CIERS2)

Get More Information
Name:

Phone:  

Email:  

Comments:

Help us prove you're not a robot:
 

 ‭(Hidden)‬ Catalog-Item Reuse

Microsoft Gold Partner

PMI R.E.P.

AXELOS Limited

The Microsoft Gold CPLS logo is a mark of Microsoft, Inc.

The PMI R.E.P. logo is a mark of the Project Management Institute, Inc.

ITIL® is a registered trade mark of AXELOS Limited.
IT Infrastructure Library® is a registered trade mark of AXELOS Limited
The Swirl logo™ is a registered trade mark of AXELOS Limited
Accredited course material is property of ITSM Academy.

Connect with us

Springhouse Education & Consulting Services

Corporate HQ:Eagleview Corporate Park
707 Eagleview Boulevard
Suite 207
Exton, PA 19341

610-321-3500 - info@springhouse.com